Wood Plastic Composite (WPC) Manufacturer in China
Tel: +86(752) 2222-845 Mobile: +86-139-2288-7311
info@protechwood.com Contact us at any time
Building 1, Huamao Building, Wenchang Road 1, Guangdong, China
Monday - Saturday 08:30-18:00

Blog Posts

November 3, 2015

Protechwood – How to Develop a Patio Awning

On a very hot summer time day, sitting on a patio or a deck can get truly unpleasant as you are perspiring absent and receiving burnt by the solar. It truly is pleasant to loosen up in the solar at situations, but having the solution of sitting in the shade is a pleasant luxury. It can charge a few thousand pounds to buy an awning, but if this just isn’t your budget, there is even now an solution for you! This guidebook will share with you how to solve this problem by creating your possess patio awning!

The initial move in creating your patio awning is building absolutely sure you have the appropriate resources. You are going to require a measuring tape, electric drill, four grommets, four stakes, four sections of rope, two key rings, two screw hooks, two help poles, a sewing device with a large needle and a large piece of canvas. These resources are incredibly charge effective as properly.

The initial move will be to determine the dimension of the canvas you require for your awning. Often buy extra than you believe you require this way you have more material for a hem. Now your sewing expertise will arrive into perform! You are going to now require to sew the hems all around the material this will assistance stay clear of any fraying. Due to the fact this canvas will be outdoors, use nylon thread since it can be extra sturdy in the outside ailments. On the four corners, set up one particular grommet on each corner.

Choose the tape measure and measure one particular side of the awning. You want to measure from grommet to grommet. Then move forward to drill two pilot holes in the wooden siding where by the awning will department out from. Choose the hooks and screw them into the pilot holes you have just established. If you consider screwing the hooks in before the holes are drilled in, you could end up having concerns. It truly is a significantly less complicated approach by drilling the pilot holes.

On each grommet, set up a single key ring. You are going to want to do this on the side of the awning that’s going up from the property. Hook the key rings on the hooks, so it will be a whole of two key rings positioned on the two hooks. At this issue, you have previously put in an full side of your awning!

Now it can be time to set up the poles to help the awning. Stretch the canvas awning out to determine where by the spot the supporting poles. The poles must be sturdily positioned in the dust or have a flat foundation to stand on. Choose the poles and spot them through the grommets on the canvas awning.

Choose the tope and in two sections, tie it to the grommets where by the poles are positioned. For extra help, stake one particular of the ropes straight absent from the poles. With the other rope, stake it to the side so the poles have help to the entrance and to the side.

With these uncomplicated actions, you can establish your possess awning. It will only take a couple several hours and it would not charge approximately as significantly as paying for and having an awning skillfully put in. Nonetheless, it will complete your purpose of maintaining you amazing on people very hot summer time times!

Supply by Protechwood

All Posts , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Contact Us
Building 1, Huamao Building, Wenchang Road 1, Guangdong, China
+86(752) 2222-845