Wood Plastic Composite (WPC) Manufacturer in China
Tel: +86(752) 2222-845 Mobile: +86-139-2288-7311
info@protechwood.com Contact us at any time
Building 1, Huamao Building, Wenchang Road 1, Guangdong, China
Monday - Saturday 08:30-18:00

Blog Posts

April 6, 2015

Protechwood – How to Thoroughly clean and Use Deck Paint

Thanks to the expanding reputation of decks, there are now a extensive range of Deck coatings ranging from conventional penetrating sealers and stains to new drinking water dependent latex goods. In the alkyd category, there are clears, semi transparent and opaque finishes. In latex, semi transparent and opaque.

Many house owners are setting up to use the semi transparent or opaque to improve the safety and length of their deck coating.

Get started by cleansing and energy washing to get rid of dust, mildew and aged deck coatings. If you are using a very clear deck coating, deck brightening goods help restore a “new wooden” glance to the wooden.. Both sides of the railings should also be energy washed.

Brushes and Rollers – After the deck is thoroughly clean and comprehensively dry, commence with a brush on the exterior of the deck, on tops of the railing and work your way down to the deck, then in towards the dwelling. Then switch to a roller for the deck, setting up at an exterior edge and functioning towards the dwelling. Use even pressure on the roller on every single board to give uniform coverage and sheen.

Spraying is an additional way to apply deck coatings. It’s faster than using a brush or roller, but you need to be certain to protect scrubs and so on. from overspray. Spray equipment has come to be reasonably priced in current a long time or can be rented at lots of rental centers. Verify with a paint expert for idea dimension and pressure location – which will rely on the kind of deck coatings you use.

Spray railings initially, except the railings are to be a various coloration than the deck. Then the deck should be coated initially. One idea for preserving plants or other objects from overspray is to tape plastic or paper to the exterior of the railing so it can catch the overspray. When spraying the deck by itself, spray evenly in excess of a five to 6 foot sq. region, then go back in excess of that region with a one/2 inch nap roller to distribute coating evenly into deck. Carry on this method in sections till done. Be certain to use a massive defend (these types of as four ft sq. piece of cardboard or light-weight plywood) when painting along with the dwelling to protect it from overspray.

Supply by Protechwood

All Posts , , , , , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Contact Us
Building 1, Huamao Building, Wenchang Road 1, Guangdong, China
+86(752) 2222-845
+86-1392-2887-311
Cart