You would be difficult-pressed to inform the difference among serious wood ceiling beams and substantial-top quality polyurethane search-alikes. If you want the search of serious wood beams without the need of the difficult labor of installing and finishing them, faux wood beams are the ticket. You can get them in loads of types and prefinished colours to go well with your taste, from rough and rustic to smooth and shapely.
Fake beams are a portion of the bodyweight of wood, so a single human being can very easily carry the major beam, and two people today can safely and securely maneuver them in the course of installation. You cut them with everyday woodworking saws, and they connect to the ceiling with adhesive and a few screws.
Here is how quick it is to install a ceiling beam.
What You Need to have
- Beams and matching wood filler, offered on the web for shipment to your door (Google “faux wood beams”)
- Short pieces of 2×4 to use as mounting blocks
- three-inch screws or anchors for attaching 2×4 blocks to ceiling
- 2-inch screws for attaching beam to blocks
- Design adhesive such as Liquid Nails Poly or PL Top quality Poly
The ceiling beam has a U cross section, open together the major where by it rests from the ceiling. To install the beam, you very first cut small wood blocks that fit inside of the U and screw these to the ceiling. Then you utilize adhesive to the major edges of the beam, slip it around the blocks and screw the beam to them.
Phase By Phase
Soon after you’ve planned where by the wood beams will go, just follow these uncomplicated steps to install each beam:
- Evaluate the inside of width of the ceiling beam and cut 2×4 blocks to fit. You have to have about a single block for each four feet of beam.
- Mark where by the beam will go on the ceiling making use of a pair of chalk lines or strips of painter’s tape.
- Attach the 2×4 blocks with screws or anchors every single three-6 feet together the lines you’ve marked. Then you can dust off the chalk line or take away the painter’s tape.
- Mark the beam for chopping. If the wall and ceiling do not form a appropriate angle, transfer the angle making use of a sliding T bevel. If the beam extends from wall to wall, mark it about 1/8 inch for a longer time for a cosy fit.
- Lower the faux wood beam to size. Use a electric power miter saw, guide miter box or any sharp, wonderful-tooth woodcutting saw for a smooth cut. Dry-fit the cut beam to make confident the size is appropriate.
- Apply construction adhesive together the open major edges of the beam.
- With a helper, slip the beam around the blocks, maintain it snugly from the ceiling, and screw it to each block on each facet. Countersink the screws slightly.
- Fill the screw holes with matching wood filler.
- Climb down the ladder, sit again in a cozy chair and admire the new dimension you’ve just extra to your area.
Strategies for Fantastic Effects
- If attainable, posture each 2×4 block on a ceiling joist. Then you can use simple screws to connect them securely and not have to hassle with plastic or metallic anchors.
- Lower the ceiling beam slightly very long so the finishes fit snugly into place from the walls.
- Apply the bead of adhesive towards the inside of of the wood beam so it does not squeeze outside the beam. If some adhesive does squeeze out, diligently wipe it away. Or, to stay clear of smearing, allow the adhesive harden very first and then cut it away with a razor or utility knife.
You can do considerably much more than connect faux wood beams to the floor of the ceiling. You can enclose the open facet and finishes of the beam for a absolutely reliable search from all angles. You can suspend beams from level to level to simulate ties or trusses. You can use them vertically to simulate support posts. And you can use faux wood beams and components outdoors as perfectly, for all the things from ornamental headers and corbels to freestanding pergolas.
Resource by Protechwood