Wood Plastic Composite (WPC) Manufacturer in China
Tel: +86(752) 2222-845 Mobile: +86-139-2288-7311
info@www.protechwood.com Contact us at any time
Building 1, Huamao Building, Wenchang Road 1, Huizhou, Guangdong, China
Monday - Saturday 08:30-18:00

Blog Posts

May 10, 2015

Protechwood – Setting up Aluminum Lattice

Aluminum lattice can be purchased under many distinct brand name names. It is, for the most section, all the exact product. Most of the components are manufactured from light-weight pounds roll formed aluminum.

Aluminum lattice has many positive aspects above a wood framework. These aluminum areas appear just like wood but they have a baked on enamel complete that is almost upkeep absolutely free. You will by no means have to be concerned about the rafters or the lattice warping. That does not transpire when you use aluminum.

Setting up aluminum lattice is just as uncomplicated as creating a wood framework. Some of the areas are distinct, some of them attach differently, but the basic format is the exact.

It is incredibly essential to give careful thing to consider to your hanging peak. Attaching to your property will be 6″ rafters. The 1 1/2″ or 2″ lattice will go on leading of the rafters. On the exterior of your patio the rafters will rest on an eight” header.

The rafters are held onto your property with brackets and are held in place on leading of the header with brackets. These brackets need to be mounted working with the exact spacing so they all line up. When the header is however on your saw horses you will want to install the write-up brackets and within write-up sections.

The header can be stood up and held in place with the two end rafters. Now is the time to make absolutely sure every thing is square and that the posts are the correct duration. You can then anchor the posts and complete putting in the rafters.

The lattice is next to be mounted. Here is a incredibly uncomplicated trick to get your spacing ideal. Begin with 10 specific pieces of lattice and attach just about every other one to the rafters. You will now elevate out the unfastened kinds, include a few extra and do it once more. Making use of your unused lattice pieces as spacers will give you the expert appear you are after.

The posts are manufactured of 3 pieces. The exterior pieces are just decoration and they can be mounted at any time. The write-up caps are held in place with many screws just about every. A significant gap is drilled into the exterior of the write-up cap. You can then insert the screw, connected to a lengthy socket, by way of the gap and into the back side of the write-up cap. The significant holes are then protected with plastic plugs. Be careful to drill the correct sizing gap so that the plugs will suit snuggly into place.

If the write-up caps need to be minimize be absolutely sure and minimize the base side, not the leading. Aluminum can be effortlessly minimize with a ability saw and standard plywood blade. Mark your lines straight and square for finest effects.

You will have a couple of baggage of plastic caps. The finishes of the lattice and rafters will need a capped. You need to also have a can of contact up paint. This can be utilised for any scratches and to cover any uncovered screw heads.

When it is accomplished you will have a upkeep absolutely free patio cover that will give you years of enjoyment.

Supply by Protechwood

All Posts , , , , , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Contact Us
Building 1, Huamao Building, Wenchang Road 1, Huizhou, Guangdong, China
+86(752) 2222-845
+86-1392-2887-311